We all are familiar with leaking toilets, right? š½š¦ The constantly running water is not only a waste, but also creates a nasty yellow buildup on the toilet which is an EYESORE for every houseowner! š§š¤¢ It might seem that the problem is gone after we fix that, but it tends to return some time later! ā©ļøš After having tried a variety of methods, I am coming up with a super hack that will help solve this problem forever! ā š I will show how to do that in this article! š
A running toilet is a frustrating issue that many homeowners face. You fix the leak, feeling proud of your handiwork, only to find that after a few months, the problem returns, and water is again leaking from the tank.
Although the leak may seem minorāa faint trickle thatās hard to detectāit adds up over time. Constantly running water not only wastes a significant amount, but it also creates an annoying yellow buildup on the toilet thatās tough to remove.
Iāve tried a variety of solutions over the years, but nothing seemed to work. At one point, I nearly gave up, convinced I was just going to have to live with it. But as the saying goes, “If at first you donāt succeed, try, try again.”
Iām sure many of you have encountered the same issue. The primary culprit is often the toilet flush valve. The rubber gasket is supposed to form a tight seal to prevent water from escaping. But over time, dirt, sand, and other debris build up on it, causing it to lose its seal and start leaking.
In the past, I would remove the valve, clean the rubber seal of dirt and grime, and the leak would stop for a whileāonly to return later. Some people recommend simply replacing the seal with a new one, but theyāre usually sold as part of a complete valve set, which is a much more expensive solution.
Then one day, my grandfather, who was visiting, offered a solution. He smiled and said, “This is a problem thatās been around for hundreds of years. The fix is simple: hang a weight on the valve, and itāll solve the issue.”
The logic behind this is straightforward: the valve controls the water flow in the tank by shutting off the water under pressure. When the rubber gasket is in good condition, the pressure is enough to keep the water from leaking. But when the seal is damaged or worn, water escapes. Adding a bit of extra weight on the valve helps ensure that it shuts more tightly.
To be honest, I never would have thought that the fix could be this easy. Over a year has passed since I tried this trick, and my toilet tank has remained leak-free ever since!
